ACOEM SMC – Effektiv Maskindiagnos på Några Minuter
ACOEM SMC är det ultimata verktyget för maskindiagnostik, utformat för att underlätta mekanikers och underhållsteknikers arbete. Med detta bärbara maskindiagnosverktyg kan du snabbt och enkelt kontrollera hälsan hos alla roterande maskiner, oavsett när det behövs. Det bästa av allt är att du inte behöver någon särskild utbildning eller certifiering för att använda det.
Med ACOEM SMC kan du generera klara och pålitliga maskindiagnosrapporter som ger dig en tydlig bild av maskinernas status. Det är ett kraftfullt verktyg som hjälper dig att identifiera maskinfel snabbt och effektivt, vilket minimerar driftstopp och ökar produktiviteten.
Diagnostik i 3 enkla steg
- Välj den maskin du vill diagnostisera från enheten.
- Ta avläsningar vid varje automatiskt utpekad punkt.
- Granska maskindiagnosrapporten för att ta reda på vad som är fel och vad du behöver åtgärda.
Acoem SMC finns också tillgängligt som EX-system, Acoem SMC EX EX – ATEX Zon II 3 G Ex ic IIC T4Gc (Zon II: Industri där explosiv atmosfär, bestående av en blandning av luft och brandfarligt material i form av gaser, rök eller dimma, sannolikt bildas ibland under normal drift. Gruvor undantagna.) Det har samma prestanda och förmågor som SMC.
Acoem SMC finns även som EX-system
Acoem SMC finns även som EX-system, Acoem SMC EX EX – ATEX Zone II 3 G Ex ic IIC T4Gc (ZONE II Industry där explosiv atmosfär, bestående av en blandning av luft och brännbart material i form av gaser, rök eller dimma, sannolikt kommer att bildas ibland under normal drift. Gruvor exkluderade.) Acoem SMC EX har samma prestanda och kapacitet som Acoem SMC.
Accurex™ – Automatisk maskindiagnos
Acoem SMC unika automatiska maskindiagnostikfunktion, Accurex ™ , är inbyggd i Acoem SMC. Den innovativa maskindiagnostikfunktionen ger oslagbart snabba, relevanta och tillförlitliga resultat för ett brett spektrum av maskinproblem som obalans, justeringsfel, kavitation, strukturella resonanser, lagerproblem mm.
Acoem SMC maskindiagnostikfunktion skiljer sig från alla andra system.
Inbyggt Stroboskop
Det inbyggda stroboskopet gör det enkelt att hitta varvtalet vilket är avgörande för att säkerställa en korrekt diagnos.
Inbyggd kamera
För enkel maskinidentifiering, sensorpositionering och rapportillustration
Three-axis wireless sensor
The Acoem SMC wireless tri-axial sensor will take readings in the vertical, horizontal, and axial direction simultaneously making the measurement process fast and easy.
Built-in laser pyrometer
The Acoem SMC has a built-in laser pyrometer that makes it easy to take the temperature of your machine to verify your diagnosis.
Acoem SMC Balancing KIT (Accessories)
The Acoem SMC Balancing is a powerful balancing tool; smart and easy to use. Acoem SMC Balancer guides the user throughout the process and automates all calculations. The user is led through the user-friendly visual interface to define the machine, configure the speed counter, and select test weights. Following the measurement procedure, the balancing instrument presents the correct correction weights.
Acoem SMC Balancing is available in balances for 1 plane, 2 plane balancing.
Limited lifetime warranty
Acoem SMC, SMC EX, SMC Balancing Kit, SMC Balancing Kit EX have a limited lifetime warranty. For more information, contact your local dealer!
What’s in the case?
Acoem SMC – Package with Case
- Acoem SMC display unit
- Acoem SMC sensor
- USB cable for the wireless sensor (power supply)
- 6 pcs of adapters
- Acoem SMC power supply
- Wireless sensor power supply
- Universal tool
Techincal specification
Acoem SMC PACKAGE*
Touchscreen
Graphic color touchscreen
Resolution: 800 x 480 pixels
Dimension: 154 x 92 mm (D7”)
Adjustable brightness
Can be used outdoors
Icon functions
Touch keyboard
On touchscreen:
- 10 contextual function keys
- Functions are organized for single-hand measurement (left or right)
- Direct access to general functions: Home, Help, Setup, Screen copy, Picture, Bar code reader, Text note, Audio comment, Pyrometer, Stroboscope
- Full keyboard for text input. Several keyboards are available: qwerty, azerty, Chinese…
Acquisition
- Triaxial synchronous acquisition (wired or wireless)
- Synchronous on 2 analog channels + trigger input for balancing
- 24 bits conversion
- Sampling frequency: 51.2kHz
Antialiasing filter
Wireless acquisition with Acoem SMC WLS triaxial accelerometer
Digital signal processors
Real-time processing:
- 40 kHz on 4 channels
- Up to 80 kHz on 2 channels
Memory: 3.5 GB for measurements
Communication
USB 2 type B device (direct connection to PC)
USB 2 type A host (for USB stick)
Ethernet
Wi-Fi
Battery
Autotest and calibration function
High-density Li-Ion type
Rechargeable without removing
Battery lifetime: 10 hours under intense use
Programmable automatic standby mode and switch-off
Analog Inputs
Up to 4 programmable signal inputs (depending on instrument option):
- Frequency range: 0 – 40 kHz on 4 channels, 80 kHz on 1 channel
- Overload indicator in % with memorization
- IEPE interface with real-time integrity control, range ± 8V (power supply: 4 mA constant current 23 VDC)
- Dynamic signal measurements (acceleration, vibration velocity, absolute displacement, relative displacement, electrical current, etc.)
-
- +/- 10 VAC
- 0, -24 V for proximity probes (a -24Vdc power supply is available on each channel)
- Input impedance AC/DC: 100 kΩ
- Accuracy: +/- 1%
- Sensors without electronics with an optional charge amplifier
- DC input: from -24 VDC to +24 VDC for measurements of position and process parameters
- AC coupling: 0.3 Hz
- Compatible with triaxial sensor
Trigger input:
Range: +/- 10 V, 0 to +24 V, 0 to – 24 V
Adjustable triggering parameters
Automatic setup function
For rotation speed measurement, synchronous analysis, balancing, order analysis.
Input impedance: 100 kΩ
+ 5 Vdc power supply for tacho probe
-24 Vdc power supply for proximity probes
Microphone input
Microphone input for audio inspection notes
Analog OUTPUTS
1 headphone output to listen sensor signal, recorded signal or audio inspection notes
1 stroboscope output: TTL
For each channel and trigger input:
-24 Vdc power supply for proximity probe
BUILT-IN PYROMETER WITH LASER-SIGHTING
Contactless temperature measurement:
- Range: 0 to 200°C
- Accuracy: +/- 3°C for ambient temperature ranging from 18°C to 28°C.
- Resolution: 0.5°C
- Repeatability: +/- 1°C
- Field of view: 5° @ 50%
(∅ target ≃ 4 cm @ 50 cm) - Time response: 1 s
- Fixed emissivity: 95%
BUILT-IN STROBOSCOPE
Rotation speed measurement:
- Range: 30 to 15000 RPM
- Automatic setting to machine speed predefined in setup
- Adjustment:
-
- ½, x2
- Fast
- Fine
- Flash duration: adjustable from 0.5 to 15°
- Can be used independently or to adjust rotation speed in a route or from a spectrum display
Built-in camera
Resolution: 640 x 480
Autofocus
Distance: 20 cm to ∞
Flash mode
Identification of measurement point
Built-in bar code reader
Reading distance: from 20 cm to 50 cm according to the code dimension
Bar code format: QRcode
Learning mode to avoid codes manual input
Mechanical/environment
Protection: IP65.
Case with shock protection rubber
Shock protection: 1.2 m drop (1 m for EX version)
Standard compliance:
- Safety: IEC61010-1
- EMC: directive 2004-108-CE
Dimensions: 200 x 265 x 65 mm
Weight: 1.8 kg including battery and rubber protection
Operating temperature: -10°C to 55°C
Humidity: 95% no condensation
Acoem SMC-EX, intrinsically safe version:
ATEX certification: EX II 3 G, EEx ic IIC T4 supplied with certified accessories.
IECEX certification (pending)
Note: shock protection: 1 m drop. The protection screen accessory cannot be used in dangerous areas and is not supplied.
Remote access
The Acoem SMC can be set up so as to communicate with your network through its Ethernet or Wi-Fi interface and used as a remote station. You can then use the applications installed on your computer directly from the Acoem SMC (SUPERVISION, CMMS…).
*Note! Specifications are preliminary and subject to change without notice.
Accessories
Acoem SMC Balancer/also available in ex version
An upgrade kith with laser tachometer with cable for connection on channel C, supplied with a 5m extension cable.
USB cable for connecting the Acoem SMC to a computer (reports)
Magnet holder 2 ASH accelerometers, 2 straight cables for ASH, 2 high-power magnets for ASH.
Acoem SMC Balancer is also available as EX system EX – ATEX Zone II 3 G Ex ic IIC T4Gc, with the same performance and capabilities as the regular Acoem SMC Balancer (ZONE II Industry where explosive atmosphere, consisting of a mixture of air and combustible material in the form of gases, smoke or fog, is likely to be formed sometimes during normal operation. Mines excluded.
Wired triaxial sensor kit
Also available in an EX version.
Audio adapter
Also available in an EX version.
Produktformulär
Kontakta oss för att få mer information kring denna produkt!